|
Now, I flood the surface with Watco natural colored Danish Oil. I suppose any brand would work fine, or even a shop-made very thin varnish. I'm used to using Watco, and am happy with the results I get.
What is desired here is to "wet" the dye, and very lightly seal it. A heavy sealer will not work with the techniques to follow. Wet the surface well, and allow it to soak in as well as it will. In the case of this Hard Maple, I left it on the surface for about ten minutes. Any longer doesn't seem to soak any more in. Don't allow it to tack up on the surface, though. This will make it hard to remove the excess, and might interfere with the antiquing step. |
|
|
Once the wood has soaked as much of the finish as it will, gently wipe the excess back off the surface. You don't want to put a lot of pressure on the surface here, just lightly rub it off. I use paper towels, changing to a new one when they get soaked.
|
|
|
By now, the piece looks very nice. It would be hard to blame someone for deciding to stop and call this good enough. Bear with though, because the next step is pretty interesting. |
|